Kevlar Cutter KC699
The KC699 Kevlar Cutter is used to cut the Kevlar Yarn which usually serves as the strength member of a fiber optic cable.
Round Cable Stripper MK02
The MK02 Round Cable Stripper can strip to remove the outer jacket and other insulations that are used to protect the optical fibers of the fiber optic cable.
Fiber Optic Stripper CFS-2
The CFS-2 Fiber Optic Stripper is a general stripper that enables users to strip the buffer coating of the optical fiber to expose 125-micron cladding. It is designed with comfort-grip ergonomic handles and comes with a lock to hold it closed when it is not in use.
Fiber Optic Polishing Film
The Fiber Optic Polishing Films are used to polish the end face of the fiber optic connectors for better fiber optic connection and low optical loss.
Fiber Optic Polishing Disc
The Fiber Optic Polishing Disc is a tool made of highly precise machined metal or plastic material to carry out polishing work to the fiber optic connector. It can support a variety of fiber optic connectors.
Fiber Optic Polishing Plate, Pad and Mat
The polishing plates, pads and mats provide the necessary surface support for the fiber optic connector polishing work to be carried out.
Kimwipes are cleaning wipes that can be used in a laboratory environment. They can be used on their own or together with other cleaning solvents.
Loctite 638 & Loctite 7649
The Loctite 638 is an adhesive that can retain its strength and is resistant to high temperature. It is usually deployed in the curing of parts where high dynamic forces or cyclic loading is expected.
The Loctite 7649 is a single component non-CFC solvent-based surface activator and is designed to increase the curing speed of the Loctite adhesives.
Handheld Fiber Microscope F1-MS200U
The F1-MS200U fiber microscope is used to carry out inspection work of the end face of a fiber optic connector. During the inspection, impurities such as dirt, debris or oil that may interfere with the transmission of the optical signal can be identified.
Mini Visual Fault Locator VLS-8 Series
The VLS-8 Series Mini Visual Fault Locator is very compact which makes it highly portable to be deployed at any locations that require inspection works for the fiber optic link to be carried out. It can check the fiber optic cable, fiber optic patch cord for breakages or damages by providing a laser source which will pass through the entire length of the cable being tested. If there is any fault detected, the light from the laser source can be seen at the damaged point.